24
2024
-
06
Automatic visual inspection machine for the dimensional and surface inspection of rubber O-rings
Lanhe seals recently purchased a new seal ring Automatic visual inspection equipment,
The O-ring automatic visual inspection machine is used to replace the manual size detection and appearance detection of various types of O-rings, to achieve automatic feeding, automatic detection, automatic screening process, saving labor costs, improving production quality, and improving production efficiency.
Technical characteristics of O-ring rubber seal automatic visual inspection machine
1, the O-ring size inspection accuracy is high, good stability, easy to operate.
2, the O-ring is stable and accurate in the detection process.
3, the test result data shows that it is automatically judged as "qualified" or "unqualified".
4, the O-ring size inspection using Germany CCD high-resolution camera, good quality and reliability.
5, can be equipped with automatic conveying device and automatic assembly device, complete the O-ring automatic in and out of material.
O-ring rubber seal automatic visual inspection machine working mode:
Use forward light to detect the appearance of the O-ring (such as defects, foreign objects and breaks, etc.), and use backlight to detect the size of the O-ring, such as inside diameter, outside diameter, burr and deformation. The product is transmitted to the glass disk through the vibration disk, or the transmission belt, and the O-ring is detected by the high light transmittance of the glass and the optical hardware and software to achieve the detection effect.
O-ring rubber seal Automatic visual inspection machine detection range:
Products that need to be turned over, such as O-rings, graphite sheets, rubber seals, rubber plugs, rubber pads, special rubber parts, etc.
More News
